It refers to the process of restoring a home or property to its pre-loss state. An overflow, flood, or other water damage event may cause damage to the property. The water damage reconstruction process entails a number of steps, including loss assessment, classification based on water pollution levels, decontamination and drying of the structure, process monitoring, and process completion. The IICRC (Institute of Inspection, Cleaning and Restoration Certification) and the RIA (Restoration Industry Association) are two major certifying bodies that prescribe water damage restoration standards. Companies that specialise in water damage repair use the S500 damage due to water guide as a benchmark tool. Have a look at Water Damage Restoration.
Assessment and Categorization of Losses
The first and most critical step in water damage reconstruction is determining the extent of the damage. The assessment must be accurate in order to provide an adequate response. In order to restore the damage caused by water, technicians and insurance agencies must collaborate to consider what has been damaged and how to proceed with the restoration. A proper water damage repair requires determining the source of the damage, documenting the damage, and providing reliable estimates. The pollution levels of the water supply are used to categorise it. Below is a list of the groups.
Category 1 – water contains no faeces or urine and comes from safe sources such as pipes, drains, and toilets.
Category 2 – Contaminated water, such as that from a dishwasher, washing machine, or toilet containing urine.
Category 3 – This is water that is extremely unsanitary and can cause sickness or death if consumed. Some examples include sewage water, toilet water containing faces, standing water with microbial growth, and floodwater.
Decontamination and Dehumidification
Following the completion of the evaluation, the drying and decontamination process at the site begins. Water damage can be divided into four categories based on the degree of the damage. Class 1 damage occurs when the failure is limited to a small area and the products have absorbed less water. As a consequence, the rate of evaporation is sluggish. Damage to the entire room and carpet area is classified as Class 2 damage. Class 3 Damage occurs when the whole region is flooded with water and the damage is serious. When there are several deep saturation pockets, Class 4 Damage occurs. Water damage repair requires the use of decontamination and drying equipment such as blowers, dehumidifiers, scrubbers, and subfloor drying equipment. If contamination has been detected in the environment, decontamination is needed. Decontamination may be performed for the whole region or for small pockets of contamination.